Commercial Kitchen Fire Safety The fryer ignites. You have seconds. Make them count.
Boiling cooking oil. Gas ranges. Industrial mixers. High-voltage extraction systems. Commercial kitchens operate at the sharp end of fire risk every single service. The Fire Safety Stick is Class F rated, covers every fire class in a professional kitchen and fits where you need it most.
Every service is a
fire waiting to happen
Commercial kitchens are statistically the highest-risk indoor environment for fire in the UK. The combination of high-temperature cooking oil, open gas flames, pressurised LPG, industrial electrical equipment and fast-paced working conditions creates a perfect storm of fire risk — every single shift.
A deep fat fryer fire can flash from ignition to fully involved in under 30 seconds. Extraction ducting coated with grease can spread fire across an entire kitchen in moments. Once a cooking oil fire takes hold, the wrong extinguisher can cause a fireball that makes the situation catastrophically worse.
The Fire Safety Stick is Class F rated — specifically designed for the fire class that kills commercial kitchens — and covers every other class you face, from electrical faults to gas and packaging fires.
Using water or foam on a burning oil fire causes a violent steam explosion — projecting burning oil across the kitchen. CO₂ on a hot fat fire creates dangerous pressure differentials. The Fire Safety Stick's dry aerosol agent is specifically formulated for Class F fires and will not cause a secondary incident.
Every kitchen. Every
service. Every station.
From a single restaurant pass to a multi-site catering operation — the Fire Safety Stick belongs at every cooking station, in every vehicle and on every production line.
Class F — the fire
that closes kitchens
Every class in a
commercial kitchen. Covered.
Commercial kitchens present all five fire classes. Most traditional extinguishers cover two or three. The Fire Safety Stick covers them all — in one compact device.
Compact. Ready. Back
in service fast.
Why commercial kitchens
choose the Fire Safety Stick
| Feature | Fire Safety Stick | Wet Chemical Extinguisher | CO₂ Extinguisher |
|---|---|---|---|
| Class F — cooking oil fires | ✓ Fully rated | ✓ Rated | ✗ Not suitable |
| Residue after use | ✓ Zero — no clean-up | ✗ Wet chemical contaminates surfaces & food | ✗ Frost damage to equipment |
| Kitchen downtime after use | ✓ Minimal — back in service fast | ✗ Hours of deep-clean required | ✗ Equipment inspection required |
| Class E electrical rating | ✓ 100,000 Volts | ✗ Not rated for electrical | ✓ Non-conductive |
| Annual servicing required | ✓ None — 15-year life | ✗ Annual inspection & 5-year refill | ✗ Annual inspection required |
| Mountable at cooking station | ✓ 215g — any surface | ✗ 2–9kg — wall mount only | ✗ 2–7kg — bulky |
| Covers all 5 fire classes | ✓ A, B, C, E, F | ✗ Class F & A only | ✗ Class B & E only |
| Safe for mobile catering use | ✓ Fits in any vehicle | ✗ Heavy, liquid-filled — vehicle risk | ✗ High-pressure — vehicle storage risk |
Everything you need
to know
A kitchen fire waits for no one.
Position the Fire Safety Stick at every fryer station, every gas range and every production line. Zero residue. Back in service fast. 15 years, no servicing.
Get in Touch →Ready to protect
your kitchen?
Fill in the form and our team will be in touch with pricing, bulk order options for multiple stations or sites and answers to any questions about protecting your kitchen with the Fire Safety Stick.
We supply restaurants, pub groups, catering companies, hotel kitchens, dark kitchens and food production facilities across the UK.
Enquiry Received
Thank you — we'll be in touch shortly to help protect your kitchen and keep you in service.
| Image | Name | Summary | Price | Buy |
|---|---|---|---|---|
| Fire Safety Stick 100 Seconds | Fire Safety Stick 100 Seconds: The Professional Standard100 Seconds of Protection | 15-Year Life | No Residue The Fire Safety Stick 100 Seconds is the heavy-duty choice for those who need maximum protection without the mess of a traditional extinguisher. Designed for larger vehicles, workshops, and agriculture.
[Official UK Stockist] — View the Manufacturer How it works | £89.00 + VAT (20%) | ||
| PRO2-Retro Upgrade Kit | PRO2-UPGRADE Kit (FSS NOT Included) These are supplied as loose parts and are intended for the user to fit themselves, to upgrade previously purchased standard sticks. Each upgrade version is suitable for either FSS50 or FSS100 sticks. . | £9.09 + VAT (20%) | ||
| PRO3-Retro Upgrade Kit | PRO3-UPGRADE Kit (FSS NOT Included) The PRO3-UPGRADE kit is designed to upgrade your existing FSS50 or FSS100 to a professional standard. It includes a loose tamper tag, an extra mounting clip, and installation/maintenance stickers. You also get a FREE downloadable Maintenance Inspection log and a rigid glow-in-the-dark sign. Note: Fire Safety Stick is sold separately. | £27.27 + VAT (20%) | ||
| Fire Safety Stick 100 PRO 2 | The Fire Safety Stick 100 Pro 2 is the ultimate professional fire safety solution for commercial use. This kit features an incredible 100-second discharge time and is effective on five fire classes. It includes a tamper tag, two mounting clips, and a vinyl self-adhesive wall sign for vehicles. Weighing just 365g, it’s a hassle-free, long-lasting, and eco-friendly fire safety tool. | £100.64 + VAT (20%) | ||
| Fire Safety Stick 50 Utility | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment
The Fire Safety Stick 50 Utility is a compact, 50-second, multi-class fire extinguisher designed for tradespeople. Non-toxic, zero-mess, and ideal for toolboxes, small vans, and light industrial use. 15-year shelf life.
| £70.22 + VAT (20%) | ||
| Fire Safety Stick 100 Utility | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 100 Utility is a 100-second, multi-class fire extinguisher designed for demanding professional environments. Non-toxic, zero-mess, and ideal for workshop fire safety, maintenance vehicles, and industrial toolkits. 15-year shelf life. | £93.25 + VAT (20%) | ||
| Fire Safety Stick 100 PRO | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment FSS100 Pro Fire Extinguisher is the ultimate 100-second professional fire suppression system. Includes tamper tag, two clips, and maintenance stickers for compliance. Ideal for workshops, fleets, and industrial sites. | £94.17 + VAT (20%) | ||
| Fire Safety Stick 100 PRO 3 | Commodity Code: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 100 PRO 3 is the ultimate professional fire safety solution. This kit features an incredible 100-second discharge time and is effective on five fire classes. It includes a tamper tag, two mounting clips, and an illuminated vinyl sticker for easy location in the dark. Weighing just 365g, it’s a hassle-free, long-lasting, and eco-friendly fire safety tool. | £118.82 + VAT (20%) | ||
| Fire Safety Stick 50 PRO 3 | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 50 PRO 3 is an advanced fire safety kit designed for both commercial and domestic use. It features an incredible 50-second discharge time and is effective on five fire classes. The kit includes a tamper tag, two mounting clips, and an illuminated vinyl sticker for easy location in the dark. Weighing just 215g, it’s a hassle-free, long-lasting, and eco-friendly fire safety tool. | £93.89 + VAT (20%) | ||
| Fire Safety Stick 50 PRO 2 | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 50 PRO 2 is a comprehensive fire safety solution for commercial use. It provides a 50-second discharge and is effective on 5 fire classes. The kit includes a tamper tag, two mounting clips, and professional stickers. With a 15-year shelf life and no servicing needed, it’s a hassle-free and eco-friendly fire safety tool. Optional wall signage is available for clear marking in vehicles or buildings. | £75.72 + VAT (20%) | ||
| Fire Safety Stick Pro 50 | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick Pro 50 is a complete fire safety solution for commercial use. This kit includes a tamper tag, two mounting clips, and professional stickers. The FSS50-PRO1 is highly effective on 5 fire classes, discharges for 50 seconds, and is lightweight and clean. With a 15-year shelf life and no servicing needed, it’s the ultimate hassle-free fire safety tool for businesses. | £69.50 + VAT (20%) | ||
| Spare Tamper Tags X10 | Tamper Tag for Fire Safety Stick Ensure your Fire Safety Stick is secure and ready with an official Tamper Tag. This one-time-use seal provides an instant visual check to confirm the device has not been used or tampered with. A simple and essential accessory for both the FSS50 and FSS100, giving you peace of mind. | £5.00 + VAT (20%) | ||
| Flat Mount Bracket Wall | Flat Mount Bracket Wall – Heavy-Duty Mount for Motorsports Secure your Fire Safety Stick in extreme conditions with this heavy-duty flat mount bracket. Featuring a Velcro strap for a secure fit, this robust bracket is perfect for rallying, motorsports, and other high-vibration environments. It mounts to any flat surface and is compatible with both FSS50 and FSS100 models. | £19.20 + VAT (20%) | ||
| Curved Mount Bracket Wall | Curved Mount Bracket Wall for Fire Safety Stick Securely mount your Fire Safety Stick on any flat surface with the Curved Mount Bracket Wall. This specialized bracket provides a stable, permanent hold for both FSS50 and FSS100 models. Ideal for walls in garages, workshops, or vehicles, ensuring your fire safety device is always in a fixed, accessible location. Have been mainly used for Motor Sports previously Curved version for roll bar fitting, features feed holes for 2 cable ties. Designed to fit 38mm to 50mm roll cages. Dimensions: Length: 150mm Width: 30mm Height: 50mm Curved Mount Bracket Wall Roll-Bar Mount Bracket (MountJED1) | £19.20 + VAT (20%) | ||
| Single Mounting Clip | Single Mounting Clip (Additional or Replacement) Secure your Fire Safety Stick with an official replacement Mounting Clip. Designed for all Fire Safety Stick models, including the FSS50 and FSS100, this clip allows for easy and secure installation in your car, boat, caravan, or home. Keep your fire safety solution within easy reach and ready for any emergency. A simple, durable, and essential accessory. *Shipping to UK addresses only
| £3.70 + VAT (20%) | ||
| FSS50 Striker Cap | Has your Fire Safety Stick FSS50 lost its vital striking cap, or is it damaged? Don’t leave your fire protection to chance. The Fire Safety Stick 50 Striker Cap is the official and essential replacement part designed to ensure your FSS50 or FSS25 model is always ready for use. This small but critical accessory is the key to activating your Fire Safety Stick, allowing you to quickly and effectively combat fires. The striker cap features a brown, abrasive striking surface on one end and a black resin tip on the other. This simple yet ingenious design is what enables the device to activate its non-toxic, smoke-free potassium-based aerosol upon impact. Without a functional striker cap, your Fire Safety Stick cannot be deployed in an emergency, rendering your fire safety plan incomplete. Our replacement caps are an exact match for the original parts, guaranteeing a perfect fit and reliable performance. Each cap is manufactured to the highest standards to ensure durability and effectiveness when you need it most. Whether you’ve misplaced the cap or it has been damaged, a quick and easy replacement ensures you maintain full peace of mind. Simply press the new cap onto the end of your Fire Safety Stick and your device is instantly restored to its full, active state. Don’t compromise on safety—get your replacement FSS50 Striker Cap today and make sure you’re prepared for any situation. Dimensions
Height: 40mm Width: 33mm
*Shipping to UK Mainland addresses only
FSS50 Striker Cap
| £3.50 + VAT (20%) | ||
| FSS100 Striker Cap | Fire Safety Stick FSS100 Striker Cap (Replacement) If you own a Fire Safety Stick FSS100 and have either misplaced or damaged the vital striker cap, you need a replacement to ensure your device remains operational. The FSS100 Striker Cap, also known by its part number SCB100, is the authentic and necessary component for activating the 100-second Fire Safety Stick model. Without it, the life-saving technology of your device is inaccessible. This replacement cap is engineered specifically for the FSS100, which is the larger, more powerful unit in the Fire Safety Stick lineup, ideal for vehicles, boats, and workshops. The cap’s design is simple yet crucial: its brown, abrasive striking surface and black resin tip work together to create the friction needed to trigger the fire-suppressing aerosol. Having a spare or replacement cap on hand is a small investment that offers immense peace of mind. It ensures that your FSS100, which provides a full 100 seconds of discharge time, is always ready for a fire emergency. The caps are made from durable materials to withstand a demanding environment, and they are designed for quick and easy installation. Simply press the new cap firmly onto the end of your Fire Safety Stick and it’s ready for immediate use. Don’t compromise the readiness of your fire safety equipment. Secure your replacement FSS100 Striker Cap today and maintain the highest level of fire protection. Dimensions
40mm x 50mm
*Shipping to UK addresses only
FSS100 Striker Cap
| £3.50 + VAT (20%) | ||
| Installation Date Sticker (for FSS PRO100) | SS-1 – Installation Date Sticker (for FSS PRO)The SS-1 – Installation Date Sticker provides a professional record for non-domestic fire safety. It features fields for the installation date and signature and includes a QR code for instant access to inspection guidelines. A single design is compatible with the FSS100 models. | £0.50 + VAT (20%) | ||
| PRO1-Retro Upgrade Kit |
PRO1-UPGRADE Kit (FSS NOT Included) Upgrade your Fire Safety Stick to a professional standard with the PRO1-UPGRADE kit. This pack includes a loose tamper tag for security, an extra mounting clip for versatile installation, and a FREE downloadable Maintenance Inspection log. Ideal for commercial and fleet use. Note: The Fire Safety Stick is sold separately. | £5.50 + VAT (20%) | ||
| FSS Tactical Belt Holster | FSS Tactical Belt Holster Keep your Fire Safety Stick on your person and ready for instant deployment. This durable FSS Belt Holster is specifically designed for security, site managers, and event staff. Fits both FSS50 and FSS100 models Dimensions
150mm x 55mm x 45mm
*Shipping to UK addresses only
| £18.20 + VAT (20%) | ||
| 50 Second Fire Safety Stick | Commodity Code: 8424100080 | Portable Fire Extinguishing Equipment “50 Second Fire Safety Stick— See Official Manufacturer Specs”
| £64.00 + VAT (20%) | ||
| Floor Stand POS (Non Video) | Floor Stand POS (Non Video)Maximise sales of the Fire Safety Stick with this high-impact, secure merchandising unit. Designed for high-traffic retail environments, it combines educational graphics with a “Zero-Shrinkage” stock model. Key Features:
Includes: 1x FSDU Chassis + 15x Empty “Display Only” Cartons. | £110.00 + VAT (20%) | ||
| Premium Video FSDU | The Ultimate Retail Demo Tool. This premium FSDU features a built-in digital screen to provide a continuous product demonstration, converting passing traffic into customers.
Includes: 1x Video-Ready FSDU + 15x Empty “Display Only” Cartons. | £180.00 + VAT (20%) | ||
| FSS50 for Holiday Rentals | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment FSS50 for Holiday Rentals Works on 5 fire classes (see below) | £73.17 + VAT (20%) | ||
| Maintenance Inspection Sticker (for both FSS50 and FSS100) | Maintenance inspection sticker (anniversary) to be applied to a fitted tamper tag on the Fire Safety Stick Pro Single type fits both FSS50 and FSS100 | £0.30 + VAT (20%) | ||
| Replacement Yellow Top Cap | Replacement Yellow Top Cap Lost the top protective cap from your Fire Safety Stick, covering the black striking resin on the stick? This single cap will fit all Fire Safety Sticks – FSS50 and FSS100, as well as the discontinued FSS25 and the red sleeved FSS100 models. | £0.90 + VAT (20%) | ||
| Fire Point Vinyl Wall Sticker | Fire Point Vinyl Wall Sticker This is a vinyl wall sticker, approx 150mm x 220mm with permanent adhesive. indicating the location of the Fire Safety Stick as a fire extinguisher. Standard fire point design. Shows: Model of FSS, Classes of fires it has been certified for, and Instructions for use. We have also included 2x QR codes directing to “How to Use” and “Maintenance Guide”. Single design, suitable for both FSS50 and FSS100 models | £5.00 + VAT (20%) | ||
| Rigid Fire Point Wall Sign Luminescent | Rigid Fire Point Wall Sign Luminescent This is a rigid plastic wall sign, approx 150mm x 220mm, which is photo-luminescent (glow in the dark), indicating the location of the Fire Safety Stick as a fire extinguisher. Standard fire point design. Shows: Model of FSS (user ticks box with marker pen), Classes of fires it has been certified for, and Instructions for use. We have also included 2x QR codes directing to “How to Use” and “Maintenance Guide”. NB The signs do not come with adhesive backing. Single design suitable for both FSS50 and FSS100 Single design, suitable for both FSS50 and FSS100 models | £23.00 + VAT (20%) | ||
| Installation Date Sticker (for FSS PRO50) | SS-2 – Installation Date Sticker (for FSS PRO50)The SS-2 Installation Date Sticker provides a professional record for non-domestic fire safety. It features fields for the installation date and signature and includes a QR code for instant access to inspection guidelines. A single design is compatible with the FSS50 | £0.50 + VAT (20%) |
































