The last fire extinguisher your aircraft will ever need.
Zero residue. Zero maintenance. 15 years ready. The Fire Safety Stick protects cockpits, cabins and ground equipment without the catastrophic damage of powder — safe on avionics, instruments and upholstery.
Powder destroys what
the fire didn't.
A traditional powder extinguisher in a cockpit or cabin can write off an aircraft that the fire itself left intact. The corrosive residue penetrates every instrument, relay and connector — triggering a catastrophic avionics failure.
Avionics Destruction
Fine powder penetrates instrument panels, circuit boards and relays. The corrosive particles cause short circuits and irreversible corrosion — often discovered weeks after the incident.
Upholstery & Cabin Write-Off
Powder embeds into foam, fabric and composite materials. In a certified aircraft cabin, a single discharge typically requires full interior strip and replacement.
Extended Grounding
Aircraft subjected to powder discharge face weeks of grounding for decontamination. For charter or commercial operators, the financial impact extends far beyond the fire itself.
Pilot & Passenger Risk
Powder discharge fills the cockpit and cabin with fine particles in seconds. Pilots lose visibility and instrument readability at exactly the moment they need it most.
Built for every
aviation environment.
From private GA aircraft to commercial ground support, the Fire Safety Stick is compact enough to mount anywhere and powerful enough for any fire class.
Fits in any GA cockpit storage. Covers electrical, fuel and combustible fires. 215g — lighter than most headsets. No servicing required at annual checks.
Ideal for the tight confines of helicopter cockpits and utility bays. Zero residue is critical where powder contamination of turbine intakes can be catastrophic.
Perfect for airside ground support equipment — tow tractors, belt loaders, fuel bowsers and catering vehicles. Fleet pricing available for airfield operators.
For workshop and hangar environments where powder discharge would contaminate multiple aircraft and equipment. Keep one at every workstation.
Station across airfield vehicles, fire points and control facilities. 15-year shelf life eliminates the maintenance burden of traditional extinguisher programmes.
Protect the interiors, avionics and passenger experience of charter and private aircraft. The only extinguisher that won't destroy what it saves.
Every certified fire class (A, B, C, F and electrical fires). Every aviation environment. Absolutely no powder, no foam, no mess. The Fire Safety Stick leaves nothing behind — so your aircraft doesn't either.
Fire Safety Stick
vs powder extinguisher.
| Feature | Fire Safety Stick | Powder Extinguisher |
|---|---|---|
| Residue left behind | None — zero | Corrosive powder everywhere |
| Safe on avionics | Yes — 100% | No — causes circuit failure |
| Cockpit visibility after use | Maintained | Lost immediately |
| Annual servicing required | Never | Yes — legally required |
| Shelf life | 15 years | Typically 5 years |
| Weight | 215g | 1.5–5kg+ |
| Safe on Electrical fires | Yes — up to 100,000V | Varies by type |
| Aircraft grounding after use | Minimal | Days to weeks |
Frequently asked
questions.
The Fire Safety Stick is UKCA and CE certified and meets international fire suppression testing standards. It produces zero residue, making it the only responsible choice for cockpit and cabin use where powder contamination could be catastrophic.
Yes. It covers Electrical fires fires up to 100,000 volts and leaves zero conductive residue — completely safe to use directly on avionics, instrument panels and circuit boards without causing secondary damage.
No. The Fire Safety Stick is no annual servicing required for its entire 15-year shelf life. No annual pressure checks, no hydrostatic testing, no replacement parts — just store it and it is ready when you need it.
The Fire Safety Stick uses patented aerosol inhibition technology — it disrupts the chemical chain reaction of combustion at a molecular level, suppressing the fire without any wet or dry agent. It is clean, invisible and leaves no trace.
Yes. We offer competitive bulk and fleet pricing for airfield operators, MRO facilities and ground support fleets. Use the enquiry form above or contact us directly and we will put together a bespoke proposal.
The only extinguisher safe enough
for your aircraft.
Zero residue. 15 years ready. Classes A, B, C, F and electrical fires covered. Order today or request a trade quote for your operation.
Fleet &
operator enquiries.
From private aircraft to commercial fleets, Adam will provide expert guidance and a tailored quote within one working day.
Enquiry Sent!
Thanks — Adam will be in touch within one working day.
| Image | Name | Summary | Price | Buy |
|---|---|---|---|---|
 | Fire Safety Stick 100 Seconds | Fire Safety Stick 100 Seconds: The Professional Standard100 Seconds of Protection | 15-Year Life | No Residue The Fire Safety Stick 100 Seconds is the heavy-duty choice for those who need maximum protection without the mess of a traditional extinguisher. Designed for larger vehicles, workshops, and agriculture.
[Official UK Stockist] — View the Manufacturer How it works | £89.00 + VAT (20%) | |
 | PRO2-Retro Upgrade Kit | PRO2-UPGRADE Kit (FSS NOT Included) These are supplied as loose parts and are intended for the user to fit themselves, to upgrade previously purchased standard sticks. Each upgrade version is suitable for either FSS50 or FSS100 sticks. . | £9.09 + VAT (20%) | |
 | PRO3-Retro Upgrade Kit | PRO3-UPGRADE Kit (FSS NOT Included) The PRO3-UPGRADE kit is designed to upgrade your existing FSS50 or FSS100 to a professional standard. It includes a loose tamper tag, an extra mounting clip, and installation/maintenance stickers. You also get a FREE downloadable Maintenance Inspection log and a rigid glow-in-the-dark sign. Note: Fire Safety Stick is sold separately. | £27.27 + VAT (20%) | |
 | Fire Safety Stick 100 PRO 2 | The Fire Safety Stick 100 Pro 2 is the ultimate professional fire safety solution for commercial use. This kit features an incredible 100-second discharge time and is effective on five fire classes. It includes a tamper tag, two mounting clips, and a vinyl self-adhesive wall sign for vehicles. Weighing just 365g, it’s a hassle-free, long-lasting, and eco-friendly fire safety tool. | £100.64 + VAT (20%) | |
 | Fire Safety Stick 50 Utility | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment
The Fire Safety Stick 50 Utility is a compact, 50-second, multi-class fire extinguisher designed for tradespeople. Non-toxic, zero-mess, and ideal for toolboxes, small vans, and light industrial use. 15-year shelf life.
| £70.22 + VAT (20%) | |
 | Fire Safety Stick 100 Utility | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 100 Utility is a 100-second, multi-class fire extinguisher designed for demanding professional environments. Non-toxic, zero-mess, and ideal for workshop fire safety, maintenance vehicles, and industrial toolkits. 15-year shelf life. | £93.25 + VAT (20%) | |
 | Fire Safety Stick 50 Twin Pack | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 50 Twin Pack Double your fire protection with the Fire Safety Stick 50 Twin Pack. This value-packed set includes two FSS50 extinguishers, each offering a 50-second discharge time to tackle fires in your car, home, or workshop. They are lightweight, leave no mess or residue, and work on five fire classes (A, B, C, F, and electrical). With a 15-year shelf life and no servicing, this twin pack is a smart, hassle-free safety investment. | £121.60 + VAT (20%) | |
 | Fire Safety Stick 100 PRO | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment FSS100 Pro Fire Extinguisher is the ultimate 100-second professional fire suppression system. Includes tamper tag, two clips, and maintenance stickers for compliance. Ideal for workshops, fleets, and industrial sites. | £94.17 + VAT (20%) | |
 | Fire Safety Stick 100 PRO 3 | Commodity Code: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 100 PRO 3 is the ultimate professional fire safety solution. This kit features an incredible 100-second discharge time and is effective on five fire classes. It includes a tamper tag, two mounting clips, and an illuminated vinyl sticker for easy location in the dark. Weighing just 365g, it’s a hassle-free, long-lasting, and eco-friendly fire safety tool. | £118.82 + VAT (20%) | |
 | Fire Safety Stick 50 PRO 3 | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 50 PRO 3 is an advanced fire safety kit designed for both commercial and domestic use. It features an incredible 50-second discharge time and is effective on five fire classes. The kit includes a tamper tag, two mounting clips, and an illuminated vinyl sticker for easy location in the dark. Weighing just 215g, it’s a hassle-free, long-lasting, and eco-friendly fire safety tool. | £93.89 + VAT (20%) | |
 | Fire Safety Stick 50 PRO 2 | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick 50 PRO 2 is a comprehensive fire safety solution for commercial use. It provides a 50-second discharge and is effective on 5 fire classes. The kit includes a tamper tag, two mounting clips, and professional stickers. With a 15-year shelf life and no servicing needed, it’s a hassle-free and eco-friendly fire safety tool. Optional wall signage is available for clear marking in vehicles or buildings. | £75.72 + VAT (20%) | |
 | Fire Safety Stick Pro 50 | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment Fire Safety Stick Pro 50 is a complete fire safety solution for commercial use. This kit includes a tamper tag, two mounting clips, and professional stickers. The FSS50-PRO1 is highly effective on 5 fire classes, discharges for 50 seconds, and is lightweight and clean. With a 15-year shelf life and no servicing needed, it’s the ultimate hassle-free fire safety tool for businesses. | £69.50 + VAT (20%) | |
 | Spare Tamper Tags X10 | Tamper Tag for Fire Safety Stick Ensure your Fire Safety Stick is secure and ready with an official Tamper Tag. This one-time-use seal provides an instant visual check to confirm the device has not been used or tampered with. A simple and essential accessory for both the FSS50 and FSS100, giving you peace of mind. | £5.00 + VAT (20%) | |
 | Flat Mount Bracket Wall | Flat Mount Bracket Wall – Heavy-Duty Mount for Motorsports Secure your Fire Safety Stick in extreme conditions with this heavy-duty flat mount bracket. Featuring a Velcro strap for a secure fit, this robust bracket is perfect for rallying, motorsports, and other high-vibration environments. It mounts to any flat surface and is compatible with both FSS50 and FSS100 models. | £19.20 + VAT (20%) | |
 | Single Mounting Clip | Single Mounting Clip (Additional or Replacement) Secure your Fire Safety Stick with an official replacement Mounting Clip. Designed for all Fire Safety Stick models, including the FSS50 and FSS100, this clip allows for easy and secure installation in your car, boat, caravan, or home. Keep your fire safety solution within easy reach and ready for any emergency. A simple, durable, and essential accessory. *Shipping to UK addresses only
| £3.70 + VAT (20%) | |
 | Fire Safety Stick 50 Striker Cap | Has your Fire Safety Stick FSS50 lost its vital striking cap, or is it damaged? Don’t leave your fire protection to chance. The Fire Safety Stick 50 Striker Cap is the official and essential replacement part designed to ensure your FSS50 or FSS25 model is always ready for use. This small but critical accessory is the key to activating your Fire Safety Stick, allowing you to quickly and effectively combat fires. The striker cap features a brown, abrasive striking surface on one end and a black resin tip on the other. This simple yet ingenious design is what enables the device to activate its non-toxic, smoke-free potassium-based aerosol upon impact. Without a functional striker cap, your Fire Safety Stick cannot be deployed in an emergency, rendering your fire safety plan incomplete. Our replacement caps are an exact match for the original parts, guaranteeing a perfect fit and reliable performance. Each cap is manufactured to the highest standards to ensure durability and effectiveness when you need it most. Whether you’ve misplaced the cap or it has been damaged, a quick and easy replacement ensures you maintain full peace of mind. Simply press the new cap onto the end of your Fire Safety Stick and your device is instantly restored to its full, active state. Don’t compromise on safety—get your replacement FSS50 Striker Cap today and make sure you’re prepared for any situation. Dimensions
Height: 40mm Width: 33mm
*Shipping to UK Mainland addresses only
FSS50 Striker Cap
| £3.50 + VAT (20%) | |
 | Fire Safety Stick 100 Striker Cap | Fire Safety Stick FSS100 Striker Cap (Replacement) If you own a Fire Safety Stick FSS100 and have either misplaced or damaged the vital striker cap, you need a replacement to ensure your device remains operational. The FSS100 Striker Cap, also known by its part number SCB100, is the authentic and necessary component for activating the 100-second Fire Safety Stick model. Without it, the life-saving technology of your device is inaccessible. This replacement cap is engineered specifically for the FSS100, which is the larger, more powerful unit in the Fire Safety Stick lineup, ideal for vehicles, boats, and workshops. The cap’s design is simple yet crucial: its brown, abrasive striking surface and black resin tip work together to create the friction needed to trigger the fire-suppressing aerosol. Having a spare or replacement cap on hand is a small investment that offers immense peace of mind. It ensures that your FSS100, which provides a full 100 seconds of discharge time, is always ready for a fire emergency. The caps are made from durable materials to withstand a demanding environment, and they are designed for quick and easy installation. Simply press the new cap firmly onto the end of your Fire Safety Stick and it’s ready for immediate use. Don’t compromise the readiness of your fire safety equipment. Secure your replacement FSS100 Striker Cap today and maintain the highest level of fire protection. Dimensions
40mm x 50mm
*Shipping to UK addresses only
FSS100 Striker Cap
| £3.50 + VAT (20%) | |
 | Installation Date Sticker (for FSS PRO100) | SS-1 – Installation Date Sticker (for FSS PRO)The SS-1 – Installation Date Sticker provides a professional record for non-domestic fire safety. It features fields for the installation date and signature and includes a QR code for instant access to inspection guidelines. A single design is compatible with the FSS100 models. | £0.50 + VAT (20%) | |
 | PRO1-Retro Upgrade Kit |
PRO1-UPGRADE Kit (FSS NOT Included) Upgrade your Fire Safety Stick to a professional standard with the PRO1-UPGRADE kit. This pack includes a loose tamper tag for security, an extra mounting clip for versatile installation, and a FREE downloadable Maintenance Inspection log. Ideal for commercial and fleet use. Note: The Fire Safety Stick is sold separately. | £5.50 + VAT (20%) | |
 | FSS Tactical Belt Holster | FSS Tactical Belt Holster Keep your Fire Safety Stick on your person and ready for instant deployment. This durable FSS Belt Holster is specifically designed for security, site managers, and event staff. Fits both FSS50 and FSS100 models Dimensions
150mm x 55mm x 45mm
*Shipping to UK addresses only
| £18.20 + VAT (20%) | |
 | Fire Safety Stick 50 Second | Commodity Code: 8424100080 | Portable Fire Extinguishing Equipment “Fire Safety Stick 50 Seconds— See Official Manufacturer Specs”
| £64.00 + VAT (20%) | |
 | Fire Safety Stick for Holiday Rentals | HS CODE: 8424100080 | Portable Fire Extinguishing Equipment FSS50 for Holiday Rentals Works on 5 fire classes (see below) | £73.17 + VAT (20%) | |
 | Maintenance Inspection Sticker (for both FSS50 and FSS100) | Maintenance inspection sticker (anniversary) to be applied to a fitted tamper tag on the Fire Safety Stick Pro Single type fits both FSS50 and FSS100 | £0.30 + VAT (20%) | |
 | Replacement Yellow Top Cap | Replacement Yellow Top Cap Lost the top protective cap from your Fire Safety Stick, covering the black striking resin on the stick? This single cap will fit all Fire Safety Sticks – FSS50 and FSS100, as well as the discontinued FSS25 and the red sleeved FSS100 models. | £0.90 + VAT (20%) | |
 | Fire Point Vinyl Wall Sticker | Fire Point Vinyl Wall Sticker This is a vinyl wall sticker, approx 150mm x 220mm with permanent adhesive. indicating the location of the Fire Safety Stick as a fire extinguisher. Standard fire point design. Shows: Model of FSS, Classes of fires it has been certified for, and Instructions for use. We have also included 2x QR codes directing to “How to Use” and “Maintenance Guide”. Single design, suitable for both FSS50 and FSS100 models | £5.00 + VAT (20%) | |
 | Rigid Fire Point Wall Sign Luminescent | Rigid Fire Point Wall Sign Luminescent This is a rigid plastic wall sign, approx 150mm x 220mm, which is photo-luminescent (glow in the dark), indicating the location of the Fire Safety Stick as a fire extinguisher. Standard fire point design. Shows: Model of FSS (user ticks box with marker pen), Classes of fires it has been certified for, and Instructions for use. We have also included 2x QR codes directing to “How to Use” and “Maintenance Guide”. NB The signs do not come with adhesive backing. Single design suitable for both FSS50 and FSS100 Single design, suitable for both FSS50 and FSS100 models | £23.00 + VAT (20%) | |
| Installation Date Sticker (for FSS PRO50) | SS-2 – Installation Date Sticker (for FSS PRO50)The SS-2 Installation Date Sticker provides a professional record for non-domestic fire safety. It features fields for the installation date and signature and includes a QR code for instant access to inspection guidelines. A single design is compatible with the FSS50 | £0.50 + VAT (20%) |
